BeoVision Avant 32 DVD Product Specifications

BeoVision Avant 32 (DVD) Specifications
Dimensions W x H x D: 84 x 109 x 61cm Weight: 86 kg

Cabinet finish:
Pearlescent shades of black, silver, red, green, blue

Power consumption: Typical 134 watt/stand-by < 2 watt

Terminal included: Beo4

Stand turning function: +/- 35 degrees, remote operated
two memory positions

Picture tube/Visual picture: 81 cm - 32""/76 cm - 30"" (16:9)
Wide-Screen, Real Flat

Curtain : Electronic
Contrast screen: Anti-reflex coating

VisionClear: Auto picture adjustment
Auto cut-off
Digital CTI
Adaptive Luminance Peaking
Scan Velocity Modulatioin
Improved letterbox
Motion Clear

Teletext: Teletext level 2*, 1780 pages
Wide Screen Signalling (WSS)
Fastext (FLOF), 4 memory pages per program
17 teletext languages in 7 groups

Tuning: Autotune, program move and semiautomatic naming
Tuner range: 45 - 860 MHz, VHF, S, Hyper, UHF
TV programmes: 99
Stereo decoders: A2 + NICAM
Theft protection: With pin-code or Disabled:

DVD: Built-in
Disc sizes: 12 cm - 5""
Frequency range: 20Hz - 20KHz
Playback the following: DVD-Video, Video CD, CD-A, CD-R, CD-RW
Multistandard PAL/NTSC
Signal-to-noise-ratio Typical 100 dB, A weighted, in Audio mode
DVD Zone According to type

Loudspeakers:
Power amplifier modules 4 units
Long term max. output power 39 watts
per module
Frequency range 50 - 20,000 Hz
Max. sound pressure level 96 dB
Cabinet principle/ net volume Bass Reflex / 3.5 litres
Woofer 115 mm - 4*""
Tweeter 18 mm - 3/4""
Bass equalizer Adaptive
Magnetic shielded Yes

Dolby® Digital Decoder :
Decoding capabilities Dolby® Digital 5.1 channel decoding
Dolby® Pro-Logic decoding of two channel Dolby® Digital
Dolby® Pro-Logic decoding of two channel PCM
Dolby® Pro-Logic decoding of two analogue channels (Lt/Rt)
Automatic format detection(Dolby® Digital, PCM)
Calibration 3 channel tone control & loudness (L/C/R)
Bass management, Delay management
Sound modes (Speaker 1 - 5) Speaker 1 : Stereo internal speakers (subwoofer muted)
Speaker 2 2.0/2.1 : Stereo external speakers / Stereo external speakers + subwoofer
Speaker 3 3.0/3.1 : Dolby®-3 stereo / Dolby®-3 stereo + subwoofer
Speaker 4 4.0/4.1 : Stereo-4 / Stereo-4 + subwoofer
Speaker 5 5.0/5.1 : Dolby® Digital or Dolby® Pro-Logic Surround / Dolby® Digital + subwoofer

Connections :
- Digital Audio input 2 x Coax phono, Input-1 for AV-SCART, Input-2 for DECODER-SCART
- External Beolab loudspeakers 5 x Power Link (left, right, rear left, rear right, subwoofer. - internal center)
Loudspeakers recommended, Beolab 1, Beolab 8000, Beolab 6000, Beolab 4000, Beolab 4500
Front/Rear
Loudspeaker recommended, BeoLab 2
subwoofer

Satellite modul : (optional)
Tuner range 950 - 2150 Mhz
Programmes 119 TV/Radio
Sound systems Mono/Stereo
Satellite radio Yes
Down conv. supply 14/18 Volts control, Tone control (22 Khz)
DiSEqC (One way control)
Connections 2 x F-connector (2 x 75 ohm)

Set Top Box-Controller : (optional)
Controlling boxes with Beo4 Supported boxes : See list at Bang & Olufsen Retail System (via internet)
Controlling one or two boxes 1 box control by use of the IR-blaster included in the kit.
(2 x STB) 2 box control by use of the IR-blaster included in the kit and IR Y-adaptor(6174171)
and one more IR-blaster(8330352).
Connection 1 x stereo mini jack

Dolby® Digital
- External Beolab speakers 5 x Power Link (2 x front, 2 x rear, 1 x subwoofer)
- Digital Audio input 2 x Coax phono, Input-1 for AV-SCART, Input-2 for DECODER-SCART
Camcorder / Auxiliary 3 x Phono sockets (video in/audio L-R in) *)
S-Video (S-VHS) 1 x Y/C playback 4-pin socket
Headphone socket 1 x Mini jack
V.TAPE DECODER 1 x 21-pin for V.TAPE decoder (video, L, R in/out)
Satellite modul (optional) 2 x F-connector input (2 x 75 ohms)
STB-Controller output 1 x Mini jack (stereo for 2 x IR-blaster with IR-Y-adaptor)
(optional)